Interface Inventory
- All Known Subinterfaces:
AbstractHorseInventory
,AnvilInventory
,ArmoredHorseInventory
,BeaconInventory
,BrewerInventory
,CartographyInventory
,CraftingInventory
,DoubleChestInventory
,EnchantingInventory
,FurnaceInventory
,GrindstoneInventory
,HorseInventory
,LecternInventory
,LlamaInventory
,LoomInventory
,MerchantInventory
,PlayerInventory
,SaddledHorseInventory
,SmithingInventory
,StonecutterInventory
Material.AIR
is unspecified.
Note that whilst
iterator()
deals with the entire inventory, add
/ contains / remove methods deal only with the storage contents.
Consider using
getContents()
and getStorageContents()
for
specific iteration.- See Also:
getContents()
,getStorageContents()
-
Method Summary
Modifier and TypeMethodDescriptionStores the given ItemStacks in the inventory.Returns a HashMap with all slots and ItemStacks in the inventory with the given Material.Finds all slots in the inventory containing any ItemStacks with the given ItemStack.void
clear()
Clears out the whole Inventory.void
clear(int index)
Clears out a particular slot in the index.int
close()
Closes the inventory for all viewers.boolean
Checks if the inventory contains any ItemStacks with the given material.boolean
Checks if the inventory contains any ItemStacks with the given material, adding to at least the minimum amount specified.boolean
Checks if the inventory contains any ItemStacks matching the given ItemStack.boolean
Checks if the inventory contains at least the minimum amount specified of exactly matching ItemStacks.boolean
containsAtLeast(@Nullable ItemStack item, int amount)
Checks if the inventory contains ItemStacks matching the given ItemStack whose amounts sum to at least the minimum amount specified.int
Returns the first slot in the inventory containing an ItemStack with the given stack.int
Finds the first slot in the inventory containing an ItemStack with the given materialint
Returns the first empty Slot.@Nullable ItemStack @NonNull []
Returns all ItemStacks from the inventoryGets the block or entity belonging to the open inventorygetHolder(boolean useSnapshot)
Gets the block or entity belonging to the open inventorygetItem(int index)
Returns the ItemStack found in the slot at the given indexGet the location of the block or entity which corresponds to this inventory.int
Returns the maximum stack size for an ItemStack in this inventory.int
getSize()
Returns the size of the inventoryReturn the contents from the section of the inventory where items can reasonably be expected to be stored.getType()
Returns what type of inventory this is.Gets a list of players viewing the inventory.boolean
isEmpty()
Check whether or not this inventory is empty.iterator()
iterator(int index)
Returns an iterator starting at the given index.void
Removes all stacks in the inventory matching the given stack.void
Removes all stacks in the inventory matching the given material.removeItem(@NotNull ItemStack... items)
Removes the given ItemStacks from the inventory.removeItemAnySlot(@NotNull ItemStack... items)
Searches all possible inventory slots in order to remove the given ItemStacks.void
setContents(@NotNull ItemStack[] items)
Completely replaces the inventory's contents.void
Stores the ItemStack at the given index of the inventory.void
setMaxStackSize(int size)
This method allows you to change the maximum stack size for an inventory.void
setStorageContents(@NotNull ItemStack[] items)
Put the given ItemStacks into the storage slotsMethods inherited from interface java.lang.Iterable
forEach, spliterator
-
Method Details
-
getSize
int getSize()Returns the size of the inventory- Returns:
- The size of the inventory
-
getMaxStackSize
int getMaxStackSize()Returns the maximum stack size for an ItemStack in this inventory.- Returns:
- The maximum size for an ItemStack in this inventory.
-
setMaxStackSize
void setMaxStackSize(int size)This method allows you to change the maximum stack size for an inventory.Caveats:
- Not all inventories respect this value.
- Stacks larger than 127 may be clipped when the world is saved.
- This value is not guaranteed to be preserved; be sure to set it before every time you want to set a slot over the max stack size.
- Stacks larger than the default max size for this type of inventory may not display correctly in the client.
- Parameters:
size
- The new maximum stack size for items in this inventory.
-
getItem
Returns the ItemStack found in the slot at the given index- Parameters:
index
- The index of the Slot's ItemStack to return- Returns:
- The ItemStack in the slot
-
setItem
Stores the ItemStack at the given index of the inventory.- Parameters:
index
- The index where to put the ItemStackitem
- The ItemStack to set
-
addItem
@NotNull @NotNull HashMap<Integer,ItemStack> addItem(@NotNull @NotNull ItemStack... items) throws IllegalArgumentExceptionStores the given ItemStacks in the inventory. This will try to fill existing stacks and empty slots as well as it can.The returned HashMap contains what it couldn't store, where the key is the index of the parameter, and the value is the ItemStack at that index of the varargs parameter. If all items are stored, it will return an empty HashMap.
If you pass in ItemStacks which exceed the maximum stack size for the Material, first they will be added to partial stacks where Material.getMaxStackSize() is not exceeded, up to Material.getMaxStackSize(). When there are no partial stacks left stacks will be split on Inventory.getMaxStackSize() allowing you to exceed the maximum stack size for that material.
It is known that in some implementations this method will also set the inputted argument amount to the number of that item not placed in slots.
- Parameters:
items
- The ItemStacks to add- Returns:
- A HashMap containing items that didn't fit.
- Throws:
IllegalArgumentException
- if items or any element in it is null
-
removeItem
@NotNull @NotNull HashMap<Integer,ItemStack> removeItem(@NotNull @NotNull ItemStack... items) throws IllegalArgumentExceptionRemoves the given ItemStacks from the inventory.It will try to remove 'as much as possible' from the types and amounts you give as arguments.
The returned HashMap contains what it couldn't remove, where the key is the index of the parameter, and the value is the ItemStack at that index of the varargs parameter. If all the given ItemStacks are removed, it will return an empty HashMap.
It is known that in some implementations this method will also set the inputted argument amount to the number of that item not removed from slots.
- Parameters:
items
- The ItemStacks to remove- Returns:
- A HashMap containing items that couldn't be removed.
- Throws:
IllegalArgumentException
- if items is null
-
removeItemAnySlot
@NotNull @NotNull HashMap<Integer,ItemStack> removeItemAnySlot(@NotNull @NotNull ItemStack... items) throws IllegalArgumentExceptionSearches all possible inventory slots in order to remove the given ItemStacks.Similar to
removeItem(ItemStack...)
in behavior, except this method will check all possible slots in the inventory, rather than just the main storage contents.It will try to remove 'as much as possible' from the types and amounts you give as arguments.
The returned HashMap contains what it couldn't remove, where the key is the index of the parameter, and the value is the ItemStack at that index of the varargs parameter. If all the given ItemStacks are removed, it will return an empty HashMap.
It is known that in some implementations this method will also set the inputted argument amount to the number of that item not removed from slots.
- Parameters:
items
- The ItemStacks to remove- Returns:
- A HashMap containing items that couldn't be removed.
- Throws:
IllegalArgumentException
- if items is null
-
getContents
@Nullable ItemStack @NonNull [] getContents()Returns all ItemStacks from the inventory- Returns:
- An array of ItemStacks from the inventory. Individual items may be null.
-
setContents
Completely replaces the inventory's contents. Removes all existing contents and replaces it with the ItemStacks given in the array.- Parameters:
items
- A complete replacement for the contents; the length must be less than or equal togetSize()
.- Throws:
IllegalArgumentException
- If the array has more items than the inventory.
-
getStorageContents
Return the contents from the section of the inventory where items can reasonably be expected to be stored. In most cases this will represent the entire inventory, but in some cases it may exclude armor or result slots.
It is these contents which will be used for add / contains / remove methods which look for a specific stack.- Returns:
- inventory storage contents. Individual items may be null.
-
setStorageContents
Put the given ItemStacks into the storage slots- Parameters:
items
- The ItemStacks to use as storage contents- Throws:
IllegalArgumentException
- If the array has more items than the inventory.
-
contains
Checks if the inventory contains any ItemStacks with the given material.- Parameters:
material
- The material to check for- Returns:
- true if an ItemStack is found with the given Material
- Throws:
IllegalArgumentException
- if material is null
-
contains
Checks if the inventory contains any ItemStacks matching the given ItemStack.This will only return true if both the type and the amount of the stack match.
- Parameters:
item
- The ItemStack to match against- Returns:
- false if item is null, true if any exactly matching ItemStacks were found
-
contains
Checks if the inventory contains any ItemStacks with the given material, adding to at least the minimum amount specified.- Parameters:
material
- The material to check foramount
- The minimum amount- Returns:
- true if amount is less than 1, true if enough ItemStacks were found to add to the given amount
- Throws:
IllegalArgumentException
- if material is null
-
contains
Checks if the inventory contains at least the minimum amount specified of exactly matching ItemStacks.An ItemStack only counts if both the type and the amount of the stack match.
- Parameters:
item
- the ItemStack to match againstamount
- how many identical stacks to check for- Returns:
- false if item is null, true if amount less than 1, true if amount of exactly matching ItemStacks were found
- See Also:
containsAtLeast(ItemStack, int)
-
containsAtLeast
@Contract("null, _ -> false") boolean containsAtLeast(@Nullable @Nullable ItemStack item, int amount)Checks if the inventory contains ItemStacks matching the given ItemStack whose amounts sum to at least the minimum amount specified.- Parameters:
item
- the ItemStack to match againstamount
- the minimum amount- Returns:
- false if item is null, true if amount less than 1, true if enough ItemStacks were found to add to the given amount
-
all
@NotNull @NotNull HashMap<Integer,? extends ItemStack> all(@NotNull @NotNull Material material) throws IllegalArgumentExceptionReturns a HashMap with all slots and ItemStacks in the inventory with the given Material.The HashMap contains entries where, the key is the slot index, and the value is the ItemStack in that slot. If no matching ItemStack with the given Material is found, an empty map is returned.
- Parameters:
material
- The material to look for- Returns:
- A HashMap containing the slot index, ItemStack pairs
- Throws:
IllegalArgumentException
- if material is null
-
all
Finds all slots in the inventory containing any ItemStacks with the given ItemStack. This will only match slots if both the type and the amount of the stack matchThe HashMap contains entries where, the key is the slot index, and the value is the ItemStack in that slot. If no matching ItemStack with the given Material is found, an empty map is returned.
- Parameters:
item
- The ItemStack to match against- Returns:
- A map from slot indexes to item at index
-
first
Finds the first slot in the inventory containing an ItemStack with the given material- Parameters:
material
- The material to look for- Returns:
- The slot index of the given Material or -1 if not found
- Throws:
IllegalArgumentException
- if material is null
-
first
Returns the first slot in the inventory containing an ItemStack with the given stack. This will only match a slot if both the type and the amount of the stack match- Parameters:
item
- The ItemStack to match against- Returns:
- The slot index of the given ItemStack or -1 if not found
-
firstEmpty
int firstEmpty()Returns the first empty Slot.- Returns:
- The first empty Slot found, or -1 if no empty slots.
-
isEmpty
boolean isEmpty()Check whether or not this inventory is empty. An inventory is considered to be empty if there are no ItemStacks in any slot of this inventory.- Returns:
- true if empty, false otherwise
-
remove
Removes all stacks in the inventory matching the given material.- Parameters:
material
- The material to remove- Throws:
IllegalArgumentException
- if material is null
-
remove
Removes all stacks in the inventory matching the given stack.This will only match a slot if both the type and the amount of the stack match
- Parameters:
item
- The ItemStack to match against
-
clear
void clear(int index)Clears out a particular slot in the index.- Parameters:
index
- The index to empty.
-
clear
void clear()Clears out the whole Inventory. -
close
int close()Closes the inventory for all viewers.- Returns:
- the number if viewers the inventory was closed for
-
getViewers
Gets a list of players viewing the inventory. Note that a player is considered to be viewing their own inventory and internal crafting screen even when said inventory is not open. They will normally be considered to be viewing their inventory even when they have a different inventory screen open, but it's possible for customized inventory screens to exclude the viewer's inventory, so this should never be assumed to be non-empty.- Returns:
- A list of HumanEntities who are viewing this Inventory.
-
getType
Returns what type of inventory this is.- Returns:
- The InventoryType representing the type of inventory.
-
getHolder
Gets the block or entity belonging to the open inventory- Returns:
- The holder of the inventory; null if it has no holder.
-
getHolder
Gets the block or entity belonging to the open inventory- Parameters:
useSnapshot
- Create a snapshot if the holder is a tile entity- Returns:
- The holder of the inventory; null if it has no holder.
-
iterator
-
iterator
Returns an iterator starting at the given index. If the index is positive, then the first call to next() will return the item at that index; if it is negative, the first call to previous will return the item at index (getSize() + index).- Parameters:
index
- The index.- Returns:
- An iterator.
-
getLocation
Get the location of the block or entity which corresponds to this inventory. May return null if this container was custom created or is a virtual / subcontainer.- Returns:
- location or null if not applicable.
-